moody cvf1 retro

Price: £129.00 We have 0 in stock.

1/2

Slideshow: « » | start / stop

Wall mount lighting controller

moody cvf1™ is a wall mounted controller with built-in CV dimmer. It is designed for dynamic effects control over an RGB zone, such as a coving feature. The user selects a start and end colour, and the product fades between them at the desired rate (user programmable).

All electronics are mounted on the rear of the product, so there is no need for cumbersome external control boxes. Both programming and operation are performed via a very simple user interface, so no additional programming kit is required.

The standard moody product is supplied in a single-gang UK wall panel with a dry-line style back box, which allows the product to be used internationally. However, moody retro comprises just the dial and control electronics, so it can be slotted into existing wall plates. This is ideal for installations where the standard white panel would not match the existing decor or is not desired. moody retro offers all the control options of the standard moody range.

The user interface is a rotary control wheel which incorporates a push switch. The wheel is illuminated by a full colour LED which is used to feedback both intensity and real-time colour to the user.

From a user perspective, the product echoes the operation of a conventional dimmer switch: rotate to control intensity, push to auto-fade on or off.

Product programming is achieved by holding down the push switch for 3 seconds. The user is then guided through selection of the fade rate and start and end colours (both hue and saturation can be set). A rear panel control allows programming to be inhibited; this is useful for preserving the original design intent in an application with many users (e.g. a hotel room).

The output is 12-24 VDC constant voltage dimming (RGB common anode). The LED power supply is also used to power moody.

Retrofitting the dial


When using moody retro, you need to decide whether to use the translucent dial supplied with the product, or the dial supplied with the retrofit panel.

If the translucent dial is used, it should be fixed using a small amount of clear silicone.


If you choose to use the opaque dial supplied with the retrofit panel, the backlighting on the dial will not be noticeable. However, this approach often provides a better match with existing decor.


It should be noted that the shaft on moody retro is a 6mm diameter full circle with friction grooves. Many dials supplied by other manufacturers are designed to accept a 6mm shaft with a D shape (flat on one side). In this situation you will need to use a 6mm drill bit as a reamer, or use a sharp blade, to shape the D-profile into a 6mm diameter circular aperture.

See the moody selection guide for a comparison of features.

Customers who purchased moody cvf1 retro also purchased:

moody cvx1 retro, £129.00 - View » - Add to cart »

Wall panel controller for a zone of RGB colour with built-in CV dimmer. Retrofit module for user supplied panel.

 

moody cvz1 retro, £129.00 - View » - Add to cart »

Wall panel controller for a zone of RGB colour with built-in CV dimmer. Retrofit module for user supplied panel.

 

Flexi-Strip RGB30 1M, £5.00 - View » - Add to cart »

A 1M length of Interior / Exterior Flexible Strip of RGB LEDs. 30 LEDs per metre.

 

Flexi-Strip RGB30 5M, £25.00 - View » - Add to cart »

A 5M length of Interior / Exterior Flexible Strip of RGB LEDs. 30 LEDs per metre.

 

Flexi-Strip RGB60 1M, £5.00 - View » - Add to cart »

A 1M length of Interior / Exterior Flexible Strip of RGB LEDs. 60 LEDs per metre.

 

Flexi-Strip RGB60 5M, £25.00 - View » - Add to cart »

A 5M length of Interior / Exterior Flexible Strip of RGB LEDs. 60 LEDs per metre.

 

moody cvi1 retro, £129.00 - View » - Add to cart »

Wall panel controller for 1 channel of white light intensity with built-in CV dimmer.