Candle-Power CPM-350

Price: £85.00 We have 2 in stock.

1/2

Slideshow: « » | start / stop

High power LED dimmer

Candle-Power™ is an LED dimmer designed to control high power LED devices such as those available from Lumileds and Cree.

Candle-Power is based on a modulation technique, invented by Artistic Licence, called Asymmetric Frequency Modulation AFM. AFM is an evolution of the frequency modulation technique pioneered by Artistic Licence and published in 2002.

The product is a DIN Rail mounted enclosure providing up to 12 channels or four RGB triplets. It can operate from 15V to 48V. Each of the 12 outputs can drive one to twelve high power LEDs in series. This provides a total load capability of 144 LEDs.

Candle-Power 12 is available in a number of variants which are described by the part number: CP12-xx-yyy mA. (xx is the number of channels. Yyy is the current rating of the module). 1W LEDs are normally driven at 350mA. 3W LEDs are normally driven at 700mA.

Candle-Power CP12-0 No modules fitted, 4 Free Slots

Candle-Power CP12-3-350 3 Channel, 1 RGB, 1W LEDs, 3 Free Slots
Candle-Power CP12-6-350 6 Channel, 2 RGB, 1W LEDs, 2 Free Slots
Candle-Power CP12-9-350 9 Channel, 3 RGB, 1W LEDs, 1 Free Slots
Candle-Power CP12-12-350 12 Channel, 4 RGB, 1W LEDs, 0 Free Slots

Candle-Power CP12-3-700 3 Channel, 1 RGB, 3W LEDs, 3 Free Slots
Candle-Power CP12-6-700 6 Channel, 2 RGB, 3W LEDs, 2 Free Slots
Candle-Power CP12-9-700 9 Channel, 3 RGB, 3W LEDs, 1 Free Slots
Candle-Power CP12-12-700 12 Channel, 4 RGB, 3W LEDs, 0 Free Slots

Candle-Power CPM-100 3 Channel 100mA Module
Candle-Power CPM-350 3 Channel 350mA Module
Candle-Power CPM-500 3 Channel 500mA Module
Candle-Power CPM-550 3 Channel 550mA Module
Candle-Power CPM-700 3 Channel 700mA Module

Jump-Start can be used to set the start address.

This Product was used in these projects...

The John Murray Archive in Edinburgh - View »

 

Customers who purchased Candle-Power CPM-350 also purchased:

Candle-Power CP12-0, £285.00 - View » - Add to cart »

Candle-Power No Modules Fitted.

 

Jump-Start, £265.00 - View » - Add to cart »

DMX Tester / RDM Programmer.