moody cv

£129.00£144.00

Wall panel lighting controller with built-in CV (constant voltage) dimmer and simple programmable interface, ideal for controlling LED lighting. There are 4 variants:

moody cvi1 – Controls a single channel of intensity (white or single colour)

moody cvx1 – Controls a single zone of RGB colour

moody cvz1 – Same as cvx1, but grand master varies colour not intensity

moody cvf1 – Controls dynamic fades in a single zone of RGB colour

Clear

Detail

moody cv™ is a wall mounted lighting controller with built-in CV (constant voltage) dimmer, ideal for controlling white or colour LED coving features. It is available in 4 functional variants, each of which offer control over a single zone of colour or intensity. (If you require a DALI or DMX controller, please see the sister product, moody). The overall look of the product is determined by the choice of cosmetic cover plate.

Installation

The product is housed in a single gang UK wall panel and is supplied complete with a dry-line style back box which allows the product to be used internationally. moody cv requires a cosmetic cover plate which can be optionally purchased with the product. Artistic Licence resells the Scolmore CLICK Definity range, which is compatible with the moody design.

The material finish options (which can be selected from the pull-down menus above) are: chrome, brushed steel, stainless steel, matt black with chrome dial, matt black, polished white. Please note that the matt black and polished white cover plates do NOT support the illuminated dial feature.

The product can be powered from 9 to 24 VDC. This means that the LED fixture power supply can also power the moody cv dimmer. Alternatively, we recommend the PSU-24-2-FER.

Operation

Programming and operation are performed via a very simple user interface, so no additional programming kit is required. All electronics are mounted on the rear of the product, so there is no need for cumbersome external control boxes.

The user interface is a rotary control dial which incorporates a push switch. The dial is illuminated by a full colour LED which is used to feedback both master level and colour to the user. (Please note that if either the black or polished white cover plate options are chosen, the illuminated dial feature is not supported).

From a user perspective, the product echoes the operation of a conventional dimmer switch: rotate to control intensity (or colour for the z variant), push to auto-fade on or off.

Product programming is achieved by holding down the push switch for 3 seconds. The user is then able to step-through the desired settings for each channel or zone, depending on the variant selected (see moody User Guide for full instructions). A rear panel control allows programming to be inhibited; this is useful for preserving the original design intent in an application with many users (e.g. a hotel room).

Variants

moody cvi1 - Controls a single channel of intensity (white or single colour)

moody cvx1 - Controls a single zone of RGB colour

moody cvz1 - Same as cvx1, but grand master varies colour not intensity

moody cvf1 - Controls dynamic fades in a single zone of RGB colour

Features

  • Wall panel mount
  • Choice of contemporary material finishes
  • Wall mount lighting controller
  • CV dimming 12-24 VDC
  • Intensity, colour and dynamic effects control
  • Grand master control
  • Full RGB illuminated control wheel (excluding black and powder white fascia plates)
  • No external programming required
  • Dry-line back box supplied

Specification

  • Listing: CE
  • IP Rating: Indoor use
  • Power: 500mW plus LED load
  • Input Voltage: 12-24 VDC
  • LED Drive Current: 5A total
  • Height: 86mm
  • Width: 86mm
  • Depth: 15.2mm behind mounting surface
  • Net Mass: 0.11 kg
  • Mounting screw centres: 60.6mm
  • LED output: Screw Terminal
  • Power Connection: Screw Terminal
  • Manufacturer: Artistic Licence 
  • Country of Manufacture: UK