nanoScope tx

If the lighting desk is still in the truck and you need to test the rig – nanoScope tx is for you!

nanoScope tx is a small battery powered DMX512 transmitter. It is built into a 5 pin XLRM connector with a translucent plastic case. A gender 5FF adapter is supplied to connect to the DMX cable.

nanoScope tx lights up in different colours to show the DMX profile it is transmitting.

Two modes of operation exist, selected by a recessed slide switch which also doubles as the power switch.

In ‘Cycle Mode’, the product cycles through six different profiles. In ‘Lock Mode’ the product continuously transmits the selected profile, and remembers the selection across a power cycle.

Learn more

The DMX profiles include:

• Fade All: All channels fade from zero to full and then back to zero

• Alternate: Snaps between all even and all odd channels at full

• Rig Ch 6: Walks through six consecutive channels for RGB lamp check

• Rig Ch 8: Walks through eight consecutive channels for RGBW lamp check

• Rig Ch 512: The classic rig check mode. Walks through all channels

• Ramp All: All channels fade from zero to full and then snap

Features

• Small form factor

• Colour coded display

• Battery powered

• DMX512 transmitter back to zero.

Specification

• Listing: CE

• IP Rating: Indoor use

• Height: 38 mm

• Width: 20 mm

• Depth: 135 mm

• Net Mass: 0.06 kg

• Signal Connection: XLR5

• Power Source: 2 x AAA battery

• Battery Life: Continuous operation: 120 hours; Standby: 380 hours

• Manufacturer: Artistic Licence

• Country of Manufacture: UK

Resources

nanoScope user guide

nanoScope datasheet

nanoScope quick start guide for web

Certification

nanoScope Declaration of Conformity

nanoScope Certificate of Origin